What is the reason why the tapping machine does not move?

Tapping machine wire hammer only on the workpiece to rotate the delay in tapping into the machine failure or setting problems, causing this phenomenon there are several reasons. If the machine fails, the automatic tapping machine will automatically detect and stop the machine for warning, and the error report will be displayed on the operation screen. Through the code or fault analysis, we can know where the problem comes from. If the spindle can rotate, it means that the machine has not stopped, and the tapping machine has not gone wrong. Then it could be the power and the hammer.

If the power is insufficient, the hammer will not be supplied. If the pneumatic tapping machine is selected, it may be that the air pressure is not enough. The power of the air compressor and the size of the intake valve can be adjusted to solve the problem. When the hardness of the workpiece is too high, it is easy to attack it. By increasing the spindle rotation speed, reducing the size of the wire hammer or replacing other types of wire hammer, the problem can be easily solved. When the workpiece needs to tap the screw hole size is larger, it is not very good to attack at the beginning, and then slowly expand the hole can be attacked.