How does servo tapping machine deal with broken cone

Servo tapping machine plays a great role in mechanical production equipment, which can greatly improve the work efficiency in industrial production. Servo tapping machine may encounter some problems when it is used. The following is a simple way to tell you about this problem.

Servo automatic tapping machine is a kind of machine tool for machining internal thread with tap. It is a kind of machine tool for machining internal thread widely used. Servo automatic tapping machine for the market, with its light, flexible, efficient and other similar equipment can not replace the advantages, deeply loved by the majority of users. Fracture of servo automatic tapping machine is a common fault. What are the reasons for this problem? Just to give you a quick overview.

Wire tapping machine

1. The feed speed of the servo automatic tapping machine is too fast, which causes the torque to be too large. Therefore, the manufacturer generally suggests that when the ordinary tap is used to process the thread, its speed can not exceed 100 revolutions per minute;

2. The bottom hole size of the servo automatic tapping machine does not match the tap. This kind of situation greatly increases the chip part of the tap when tapping, so as to promote the tap more easily broken;

3. Operator's error. For example, when processing blind hole threads, when the tap is about to contact the bottom of the hole, the operator is not aware of promoting the tap fracture, which requires the staff to strengthen the sense of responsibility;

4. The cutting fluid used by the servo automatic tapping machine is not selected properly or is not used. A lot of heat is generated during the whole tapping process. Thus causing the tap to break;

5. The concentricity of the servo automatic tapping machine is not enough. The positioning of the tap to start is not clear enough, and the torque in the tapping process is too large, which causes the tap to break.